Futaba 14MZ

[Falconwings]

Gente eso es solo informativo. No empiezen con la guerra de las marcas.
El thread lo escribe el campeon mundial de velocidad de jets, Enrique Rhobens de Brasil:


I have been very lucky today, while I was getting ready to test fly a new jet (a small F-86, with a ram 500) with the Futaba 14 mz that I have been flying since january almost without issues.

The radio suddenly went into a black screen and stopped working. Turning it on or off didn´t worked too,and after taking out the battery and turning it on again the radio showed this windows error message: "T12M2 LOADER - CANNOT CREATE PROCESS" turning off by itself after clicking in the ok button.

Fortunately, this happened when the plane was in the ground, but It could happened in the other
jets I fly in this same radio, or a few minutes later, in the F-86 test flight.

In 25 years years of r/c modeling I never had a serious problem with a Futaba gear, but as I
doubt that I will ever fly this system again. And I am not only bothered that this happened to
me , but also because there is a significant number of high performance radio control models being flown with this system, exposed to this same senseless idea of installing windows in a r/c transmitter..so that´s why I am writing this alert.

A thing that troubles me is that I already had a warning of a malfunction on this same system.
Some time ago I was setting up a plane in this same radio and then a error message popped
on the screen and then the system crashed. After turning it off and on it worked again and I believed that I have done something wrong... I wrote a email at the 14 mz "owner´s club" about
this error and never had a reply, so I didn´t took the right action of grounding the system and
taking a corrective measure.

Of course I will be suggested to send the radio to fix, but that´s is not a easy task to do where
I live, and It will be frustrating losing the programming of the airplanes on it.. many hours of work ahead not to mention the flight tests to fine tune the values. And anyway, I need confidence to fly a turbine powered plane and this system couldn´t provide it again to me....I am really disappointed with this radio.

I hope that this alert help other 14 mz owners to be aware of this system inherent vulnerability,
and perhaps avoiding a serious accident.

Enrique

[Tavo_PR]

Gente eso es solo informativo. No empiezen con la guerra de las marcas.
El thread lo escribe el campeon mundial de velocidad de jets, Enrique Rhobens de Brasil:


I have been very lucky today, while I was getting ready to test fly a new jet (a small F-86, with a ram 500) with the Futaba 14 mz that I have been flying since january almost without issues.

The radio suddenly went into a black screen and stopped working. Turning it on or off didn´t worked too,and after taking out the battery and turning it on again the radio showed this windows error message: "T12M2 LOADER - CANNOT CREATE PROCESS" turning off by itself after clicking in the ok button.

Fortunately, this happened when the plane was in the ground, but It could happened in the other
jets I fly in this same radio, or a few minutes later, in the F-86 test flight.

Enrique


:eek: Anda pal ....... mano eso si que fue suerte, y de verdad que eso ha pasado hasta con radios nuevos....no se si era un Futaba o JR pero creo que a Osvaldo en sabana seca le paso algo similar con su bob cat y papo... eso si que molesta y mas cuando la comp no quiere responder a sabiendas que fue un defecto de fabrica... hace tiempo que no hablo con el pero no se si logro resolver ese lio que fue hace mucho atras. :cool:

[hgarcia]

Esto pasa cuando quieren mezclar windows con Radios de R/C. Por eso yo prefiero el 12MZ o el 9Z

[JayBarcelo]

Yo no he querido decir nada publicamente ya que no me gusta hablar mal de ningun producto pero yo he escuchado ya varias quejas de personas que han perdido aviones con problemas con el sistema de transmision y recepcion 2048 G3 de Futaba, aunque se que han estado trabajado en el problema. Esto lleva como mas de 8 meces ya.

Las soluciones que he escuchado son usar 1024 G2 en ves de 2048 G3.

[KAMIKAZE]

Yo no he querido decir nada publicamente ya que no me gusta hablar mal de ningun producto pero yo he escuchado ya varias quejas de personas que han perdido aviones con problemas con el sistema de transmision y recepcion 2048 G3 de Futaba, aunque se que han estado trabajado en el problema. Esto lleva como mas de 8 meces ya.

Las soluciones que he escuchado son usar 1024 G2 en ves de 2048 G3.


Yo tambn se como solucionar el problema jajaja pero hay q sentir la diferencia.

[KAMIKAZE]

Esto pasa cuando quieren mezclar windows con Radios de R/C. Por eso yo prefiero el 12MZ o el 9Z

como este?
http://www.hobbiespr.com/forums/attachment.php?attachmentid=3107&d=1131823372