jnegron
08-26-2008, 10:50 PM
http://i344.photobucket.com/albums/p347/rccanews/89338_ps.jpg
16mm Big Bore Shocks para el RC8:
Hard anodized, threaded 16mm aluminum shock bodies
Extra-large shock bladders to allow full volume compensation
Heavy-duty 4mm stainless steel shafts
Shock boots
Uses existing RC8 shaft and eyelet. Factory Team Gold shock shafts included.
Comes with tunable pistons (pre-dimpled)
Aluminum Caps for durability with drilled bleed hole that makes for easy bleeding and adjustable rebound
EZ Grip knurled shock collars
Improved shock boots design that won’t tear and allows easy installation of the spring cup. Boots also have built in rubber bump-stops.
29 mm stroke for buggy front
32 mm stroke for truggy front
38 mm stroke for buggy/truggy rear
Benefits:
Increased stability in rough sections
Softer landings on big jumps
More predictable in the corners
Large oil volume reduces the effect of heating up during a main event
Uses lighter oils for same feel, light oils last longer and stay more consistent in varying temperatures.
89290 16X29MM Shock Kit (Not Shown) MSRP $69.99 Available: September 2008
89338 16X32MM Shock Kit MSRP $69.99 Available: September 2008
89346 16X38MM Shock Kit (Not Shown) MSRP $69.99 Available: September 2008
89292 RC8 16MM Front Spring 3.3LB (Not Shown) MSRP $5.99 Available: September 2008
89293 RC8 16MM Front Spring 3.9LB (Not Shown) MSRP $5.99 Available: September 2008
89294 RC8 16MM Front Spring 4.7LB (Not Shown) MSRP $5.99 Available: September 2008
89295 RC8 16MM Front Spring Set (Not Shown) MSRP $16.99 Available: September 2008
http://i344.photobucket.com/albums/p347/rccanews/89146_ps.jpg
RC8/RC8T Clutch Shoes (hard)
Made from durable and hard 2024 alloy, these clutch shoes extend the life of your RC8 and RC8T clutch.
The harder material will last longer between rebuilds and maintenance, which equates to more time on the track!
Last through 45 minute to 1 hour mains with consistent feel and performance.
Tapped hole for M3x3 mm set screw for fine-tuning the feel. Set screws not included.
89146 RC8/T Clutch Shoes (hard) MSRP $22.99 Available: September 2008
http://i344.photobucket.com/albums/p347/rccanews/89358_ps.jpg
16mm Big Bore Shock Tools
These specialty tools will make your 16mm Big Bore shock adjustments a snap!
89358 16MM Big Bore Shock Tools MSRP $4.99 Available: September 2008
16mm Big Bore Shocks para el RC8:
Hard anodized, threaded 16mm aluminum shock bodies
Extra-large shock bladders to allow full volume compensation
Heavy-duty 4mm stainless steel shafts
Shock boots
Uses existing RC8 shaft and eyelet. Factory Team Gold shock shafts included.
Comes with tunable pistons (pre-dimpled)
Aluminum Caps for durability with drilled bleed hole that makes for easy bleeding and adjustable rebound
EZ Grip knurled shock collars
Improved shock boots design that won’t tear and allows easy installation of the spring cup. Boots also have built in rubber bump-stops.
29 mm stroke for buggy front
32 mm stroke for truggy front
38 mm stroke for buggy/truggy rear
Benefits:
Increased stability in rough sections
Softer landings on big jumps
More predictable in the corners
Large oil volume reduces the effect of heating up during a main event
Uses lighter oils for same feel, light oils last longer and stay more consistent in varying temperatures.
89290 16X29MM Shock Kit (Not Shown) MSRP $69.99 Available: September 2008
89338 16X32MM Shock Kit MSRP $69.99 Available: September 2008
89346 16X38MM Shock Kit (Not Shown) MSRP $69.99 Available: September 2008
89292 RC8 16MM Front Spring 3.3LB (Not Shown) MSRP $5.99 Available: September 2008
89293 RC8 16MM Front Spring 3.9LB (Not Shown) MSRP $5.99 Available: September 2008
89294 RC8 16MM Front Spring 4.7LB (Not Shown) MSRP $5.99 Available: September 2008
89295 RC8 16MM Front Spring Set (Not Shown) MSRP $16.99 Available: September 2008
http://i344.photobucket.com/albums/p347/rccanews/89146_ps.jpg
RC8/RC8T Clutch Shoes (hard)
Made from durable and hard 2024 alloy, these clutch shoes extend the life of your RC8 and RC8T clutch.
The harder material will last longer between rebuilds and maintenance, which equates to more time on the track!
Last through 45 minute to 1 hour mains with consistent feel and performance.
Tapped hole for M3x3 mm set screw for fine-tuning the feel. Set screws not included.
89146 RC8/T Clutch Shoes (hard) MSRP $22.99 Available: September 2008
http://i344.photobucket.com/albums/p347/rccanews/89358_ps.jpg
16mm Big Bore Shock Tools
These specialty tools will make your 16mm Big Bore shock adjustments a snap!
89358 16MM Big Bore Shock Tools MSRP $4.99 Available: September 2008